Fy600 Tracked 600m Pneumatic Water Well Drilling Rig

• After-sales Service: 24-Hour Online
• Warranty: One Year
• Certification: ISO 9001:2000
• Model NO.: FY600
• Condition: Used
• Motor: AC Motor
• Drill Hole Diameter: 140-350mm
• Drill Hole Depth: >200m
• Bit Type: Diamond Bit
• Drilling Way: Rotary
• Type: Crawler
• Transport Package: Standard Export Packaging
• Specification: 6200x2200x2950mm
• Trademark: ZF
• Origin: Chinalinyi
• HS Code: 8430419000
• Production Capacity: 40

Product Description

Product Introduction
Strong adaptability: It can use both water and air as a circulating medium, and can adapt to different geological conditions and construction environments. In water scarce areas or areas with high environmental requirements, air drilling can be used to avoid the problem of construction being unable to proceed due to water shortage, while reducing environmental pollution; When encountering complex geological conditions such as fractured zones and water inflow layers, using water as a circulating medium can better protect the walls, remove slag, and improve drilling efficiency and safety.
Good slag removal effect: When water is used as the circulating medium, its slag carrying capacity is strong, which can timely remove impurities such as rock debris and soil from the borehole, keep the borehole clean, and improve the drilling speed and the service life of the drill bit. When air is used as the circulating medium, it has a high flow velocity and can quickly blow rock debris out of the hole, especially in large-diameter drilling and deep hole drilling, where the advantage of air slag removal is more obvious.
Cooling and lubrication function: Whether it is water or air, it can cool the drill bit and drill rod, prevent the drill bit from being damaged due to high temperature caused by long-term drilling, and extend the service life of the drill bit. At the same time, water also has a certain lubricating effect, which can reduce the friction between the drill rod and the hole wall, reduce the wear of the drill rod, and improve the efficiency and stability of drilling.
Good wall protection performance: When water is used as the circulating medium, it forms a thin layer of mud on the borehole wall, which helps stabilize the borehole wall and prevent collapse. In some loose and prone to collapse formations, this protective wall function is particularly important. In addition, by adjusting the performance of water-based mud, such as adding wall protection agents, the wall protection effect can be further improved.
Environmental protection and energy conservation: Compared with some traditional drilling rigs, the water gas dual-use drilling rig does not require a large amount of mud when using air drilling, reducing the preparation, emission, and treatment of mud and reducing environmental pollution. At the same time, air as a circulating medium does not require a large amount of water resources, and has obvious advantages in some water scarce areas, which meets the requirements of energy conservation and environmental protection.
High drilling efficiency: The dual-purpose water and gas drilling rig can flexibly choose water or air as the circulating medium according to different geological conditions and construction requirements, thereby optimizing the drilling process and improving drilling efficiency. In hard rock formations, the use of air down the hole hammer drilling technology can drive the down the hole hammer with high pressure of air, generating high-frequency impact to break the rock and achieve fast drilling speed; In soft rock or soil layers, using water-based mud to protect the wall during drilling can quickly remove rock debris, maintain the stability of the borehole wall, and improve drilling efficiency
.

Product parameters

weight	12t
Drilling diameter	140-350mm
drilling depth	600m
One-time advance length	6.6m
walking speed	2.5 km/h
Boxing Angle	Maximum 30°
Equipped with capacitors	132kw
Use air pressure	1.7-3.5MPA
air consumption	17-42m³/min
borehole diameter	φ102mmφ108mmφ114mm
Drill length	1.5m 2.0m 3.0m 6.0m
Drilling rig lifting force	28T
Swing speed	45-115rpm
Swinging torque	8500-11000n.m
respect	6200x2200x2950mm

Characteristic
Strong drilling capability: The drilling diameter range is 140-350mm, and the drilling depth can reach 600m, which can meet various needs such as industrial and civilian drilling, geothermal drilling, etc., and can cope with deep well drilling under different geological conditions.
High drilling efficiency: Using pneumatic drive method, it is more energy-efficient and environmentally friendly compared to traditional hydraulic systems, and has a fast drilling speed. The one-time pushing length can reach 6600mm, reducing the time for frequent adjustment of the drilling rig and improving work efficiency.
Good power performance: Equipped with a 115kw Guangxi Yuchai turbocharged engine, it has strong power and a good brand reputation, providing sufficient power for various movements of the drilling rig. The hydraulic oil pump adopts a parallel transmission design (patented), with separate oil pump units, reasonable power distribution, unique hydraulic system, simple maintenance and low cost.
Flexible walking: The total weight of the machine is 12T, equipped with a track walking mechanism, with a walking speed of 2.5Km/h, a climbing ability of 30 °, a small ground clearance of 250mm, and the ability to move freely in various complex terrains such as muddy ground and mountains, making it easy to transition.
Good durability: The walking motor is equipped with a gearbox, which has a long durability life. The drilling rig chassis adopts a professional excavator chassis, with a large load-bearing capacity, wide chain plates, and minimal damage to hard road surfaces. The power head and gearbox are cast in one, with dual motors providing power, high torque, durability, and low maintenance costs.
High safety: Each drilling rig's lifting arm is equipped with a limiter to protect the oil cylinder and ensure work safety. Each hydraulic oil pipe is covered with a protective jacket, which extends the service life of the pipe and reduces safety hazards caused by pipe rupture and other issues.
Easy operation and maintenance: According to user feedback, the operation of this drilling rig is very simple and intuitive, and even beginners can quickly get started. And its maintenance and repair are also very convenient, with easy access to parts and quick replacement, making it highly cost-effective for long-term use.
Drilling tool replacement
Company Profile
Linyi Zhuanfeng Machinery Co., Ltd
Zhuanfeng Machinery Co.,Ltd. Established in 2018, located in Mengyin County, Linyi City, Shandong Province. This is a professional enterprise specializing in the field or business scope of mechanical products. The company mainly engages in the production and sales of various mechanical components, or provides mechanical engineering solutions, equipment maintenance services, etc. The company has a highly qualified technical research and development team, including several experienced engineers and professional technicians. The company has passed relevant certifications, such as ISO9001 Quality Management System Certification, ISO14001 Environmental Management System Certification, etc., to ensure that product quality and production processes comply with international standards.

Packaging and Transportation

After introducing the company and providing sales services
Standard warranty: 12 months or 2000 working hours (whichever comes first).
Defect Liability Period: Optional coverage of up to 12 months.
Global support: 24/7 technical assistance and spare parts supply.
Training: On site or remote operation/maintenance training.
frequently asked questions
1.How can we ensure quality?
Always conduct final inspection before shipment; Our main department has a one-year warranty, during which all damaged parts can be replaced with new ones. We provide machine installation and operation videos.

2. How to inspect the goods?
1) Support customers to conduct on-site inspections at the factory.
2) Support customers to designate third-party companies to inspect products.
3) Support video inspection.

3. Do you have after-sales service?
Yes, we have a dedicated service team that can provide you with professional technical guidance. If necessary, we can send engineers to your workplace and provide training for your employees.

4.How about quality assurance?
We provide a one-year quality guarantee for the host of the machine.

5.How long is your delivery cycle?
1) For inventory, we can ship the machines within 7 days.
2) Under standard production, we can deliver the machines within 15-20 days.
3) In the case of customization, we can deliver the machine within 20-25 days.